Step 1: How To Get Started
In order to use your Earthing Patch, you must connect it to the “ground port” of a grounded 3 prong outlet. Before plugging in your patch, you must check that the outlet is grounded by plugging in the outlet check, supplied.
Step 2: Test Your Outlet
In order to use your patches, you must connect it to the “ground port” of a grounded 3 prong outlet. Before plugging it in, you must check that the outlet is grounded by plugging in the outlet checker.
2 AMBER LIGHTS illuminated is GOOD and means that you have a proper ground and you are ready to connect your Earthing product.
OTHER LIGHT COMBINATIONS means your outlet is NOT properly grounded. Try testing another outlet. If it still doesn’t work, then you will need to use a grounding rod. You can order one at Earthing.com.
Step 3: (Optional) Using The Ground Rod When Outlets Aren’t Grounded
First Push the Ground Rod directly into the earth(8″ to 10″) close to the foundation of the building.
Run the cord from the Ground Rod, under or around a window or door, near where you will be using your product.
Make sure to cover the cord to prevent tripping.
Plug the prong end of your cord into the receptacle end of the Ground Rod cord. If you live in a dry area, such as a desert, soak the earth around the Ground Rod from time to time for maximum conductivity.
Step 4: Using Your Patches
1. The Patches can be applied to any part of the body for targeted pain relief. Or they can be applied to the palms of the hands or bottom of the feet as these are the most conductive point on the body.
2. Snap the cord onto the Patch connection tab.
3. Insert the end of your Earthing Cord into the 3rd hole of a grounded wall outlet.
4. Ensure the patch is securely adhered to the skin.
Always use as directed. The Earthing Connection Outlet Ground Checker is designed for 120V 60Hz use only! Use only Earthing® approved connecting cord with built-in internal safety feature. If your Outlet Ground Checker does not display 2 amber lights, then do not use the product before consulting an electrician.
For your safety, locate any connecting cord in such a way that it doesn’t cause a tripping hazard.